Super Bright Long Lifespan E40 LED corn lamps 12W

E40 led corn lights with 360 Degree Beam Angle design to make the light radiating uniformly to the ground.Easy replacement, LED Street Bulb could directly replace the traditional E40 or E27 Base CFL, HPS, HM in IP65 or IP67 fixtures.80% more energy saving compared with traditional lamps.High CRI with great directionality, CRI>80.Solves 4 difficulties for LED packaging, heat sinking, operational lifespan, luminous efficiency.High Luminous Efficiency, more than 100-110LM/W.5W-120W version with or without fan !

Solves 4 difficulties for LED Super Bright, heat sinking, operational lifespan,luminous efficiency.NO need ballast or transformer,Please take out the traditional ballast or  transformer   from the original fixture before installation.Could be installed in the IP65 sealing fixture.Private mode 6063 Aluminum thermal structure; High quality aluminum processing technique; Special Long Lifespan treatment process; Patented Ip65 ingress protection design; Super Bright Samsung 5630 smd5730/2835 series light source;Independent R&D driver.

Using life over 50,000 hours, which is about 10-15 times than ordinary energy-saving lamps. The light is high brightness, 12W LED corn lights can replace 45W ordinary energy-saving lamps or 75W incandescent lamp.The light is low power to drive, can lighting immediately , safe and healthy.We use the environmental protecting materials for recycling.Eye-shield ,no flash ,no glare.

High light efficiency: small heat, 80% electrical energy conversion to visible light (about the ordinary incandescent street light ,80% electrical energy conversion to heat, only 20% electrical energy conversion to long lifespan.Anti-mosquito: without ultraviolet light, it will not attract mosquitoes like the traditional fluorescent lamp to keep a clean interior.A variety of commercial, entertainment and cultural venues , such as: showrooms, supermarkets hotels, homes, offices and so on.

Please turn off power before install or change assembly parts.The input voltage and lamps should be matched, after connecting the power line, please make sure the wiring section is insulated.Make sure to remove or bypass the electronic ballast in the fixtures before install the lamps.15W/20W with internal driver are suitalbe for closed fixtures, 30W/40W/60W/80W/100W/120W, please don’t use the lamps in closed fixtures, for closed fixtures, we suggest using external drive for the E40 led corn lights.No-professionals, must not install and disassemble the lamps.

Leave a Reply

Your email address will not be published. Required fields are marked *